Fisher-Price J8209 Mode D'emploi page 54

Problem
Camera will not take pictures
Photos too dark
Photos too bright
Flash takes too long to recharge
54
All manuals and user guides at all-guides.com
eTroubleshooting
Cause
Batteries are weak
or exhausted
Camera is turned off
Camera memory or SD card
is full of images appears
on the LCD screen
Flash does not work because
batteries are weak or exhausted
You are out of the range
of the fl ash
You are too close to your subject
Batteries are weak
or exhausted
Solution
Replace the batteries in the
camera with four, new "AA" (LR6)
alkaline batteries.
Press the power button on the back
of the camera to turn it on.
Download images to your computer
or use the delete button on the
camera to remove some of them.
Replace the batteries in the
camera with four, new "AA" (LR6)
alkaline batteries.
The range of the fl ash is from about
1,22 m - 2,23 m (4 ft. - 7,5 ft.).
Back up – the range of the fl ash is from
about 1,22 m - 2,23 m (4 ft. - 7,5 ft.).
Replace the batteries in the
camera with four, new "AA" (LR6)
alkaline batteries.