Publicité
FEATURES AND CONTROLS
A
G
SNOWTHROWER CONTROLS
A. Chute Rotation Handle — Used to change direction of the snow
discharge.
B. Auger Control Lever — Used to engage and disengage the
auger and impeller. To engage push down, to disengage release.
C. Traction Control Lever — Used to propel snowthrower for-
ward or reverse. Push down to engage, release to disengage.
D. Speed Select Lever — Allows the operator to use one of four (3)
forward and (1) reverse speeds (see Figure 2). To shift, move speed
select lever to desired position.
NOTICE: Do not move speed select lever while Traction
Control Lever is engaged. This may result in severe dam-
age to drive system.
All manuals and user guides at all-guides.com
B
F
C
D
E
E. Clean-Out Tool — Used to remove snow and debris from the dis-
charge chute and the auger housing.
F. Skid Shoe — Used to adjust ground clearance of auger housing.
G. Chute Deflector Wing Nut — Used to control the angle of the
chute deflector (up or down).
10
Figure 2
Publicité
