Télécharger Imprimer la page

Hansgrohe HighArc Serie Instructions D'installation - Garantie page 2

Publicité

Les langues disponibles

Les langues disponibles

English
HighArc Bar Faucets
06688XX0
06696XX0
06699XX0
06857XX0
Allegro E 14801XX1
see page 5
Technical Specification
Recommended water pressure
Recommended hot water temp.
Hole size in mounting surface
Max. mounting surface thickness
Max. flow rate
*Please know and follow all applicable local codes when setting the temperature on the water heater.
Installation Considerations
For best results, Hansgrohe recommends that this unit be installed by a licensed, profes-
sional plumber.
Please read over these instructions thoroughly before beginning installation. Make sure
that you have all tools and supplies needed to complete the installation.
The hot and cold supply hoses connect to the stops with 3/8" compression fittings
(included).
Flush the hot and cold supplies thoroughly before installing this faucet. Debris in the
water line may damage the ceramic cartridge.

Solaris E
Stratos E
Metro E
Talis S
14.7 - 7.5 PSI
10° - 140° F*
1-1/"
 3/8"
. GPM

Publicité

loading