Télécharger Imprimer la page

Culligan S-W100-C Instructions D'installation De Fonctionnement page 9

Publicité

Les langues disponibles

Les langues disponibles

PRODUCT REGISTRATION
Please be sure to go online within 30 days of purchase and register your
product at www.register.culligan.com.
CULLIGAN
9399 West Higgins Road, Suite 1100, Rosemont, IL 60018
Fits Culligan
Replacement Cartridge Model: WHR-140
SPECIFICATIONS AND OPERATIONAL LIMITS:
Rate Service Flow:
Capacity:
Operating Pressure range:
Operating Temperature range:
This showerhead was packaged, marked, and provided with instructions in accordance with the
energy conservation standards set forth in 42 U.S.C § 6295. The instructions related to maintenance
of this product, including changing or cleaning showerhead components, directs the user on how
to return the product to its intended maximum flow rate. Consumers should not remove the flow
restrictor, as removal will destroy the showerhead, thus rendering the entire showerhead unusable,
and will void the product warranty. Any attempt by the user to use the showerhead without the flow
restrictor would be a violation of the energy conservation standards set forth in 42 U.S.C § 6295.
This system has been tested according to NSF/ANSI 177 for reduction of free available chlorine. The
concentration of free available chlorine in water entering the system was reduced to a concentration
less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 177.
The system has not been evaluated for free available chlorine reduction performance in the presence
of chloramines. Free available chlorine reduction performance may be impacted by the presence of
chloramines in the water supply. Please contact your local water utility to determine if chloramines
are used in treating your water.
Testing conducted under standard laboratory conditions, actual performance may vary.
System tested and certified by IAPMO R&T to NSF/ANSI 177 for the reduction
of free available chlorine.
Third party certified to meet ASME A112.18.1/CSA B125.1 and all applicable
requirements referenced therein.
Third party certified to EPA WaterSense
PERFORMANCE DATA SHEET
®
INTERNATIONAL COMPANY
Filtered Showerhead Models: S-W100-C
®
9
1.8 gpm (6.8 L/min) MAX @ 80 psi
10,000 gallons (38,000 liters)
40–125 psi (280–862 kPa)
40–120°F (4–49°C)
.
®

Publicité

loading

Produits Connexes pour Culligan S-W100-C