Publicité
All manuals and user guides at all-guides.com
Installing the Receiver module
for example wall mounting
Note
You are responsible for ensuring that the wall and fastenings
support the weight of the module.
Because of the variety of wall materials and the different types
of fastenings we have not included any fastening material.
Buy suitable fastening materials for your wall from your dealer.
Ask a building expert for advice if necessary.
Procedure
Select the position on the wall.
Make sure that there are no wires / pipes below the surface
when you drill the holes.
The specifi cations for the holes and the fastening screws for the
Receiver module can be found in the sketch on pages 24 and
25.
The data for the fastenings illustrated in the sketch (screws and
wall plugs) are only suggestions for a masonry or concrete wall.
Use the wall holder and a spirit level to mark the holes as shown
in the sketch on pages 24 and 25.
You have now fi xed the wall holder to the wall. And can hang
the Receiver module on the wall holder, sketch, pages 24 and
25.
12
Publicité
