IMEON ENERGY 3.6 Guide D'installation page 15

IMEON PARALLEL
3. OS ONE : Inverter configuration
Each inverter must be configured separately using the OS.ONE interface (please refer to IMEON 3.6
and IMEON 9.12 guide to OS.ONE access information).

The software and firmware versions of the inverters must be identical,

The inverters must have correct and identical date and time,

Operational settings must be identical:
Flow management:
The Battery :
Network Management :
4. IMEON Online
4.1 Account creation
- Go to monitoring.imeon-energy.com,
- Log in with your login and password,
- Create a user account by clicking on
- Fill in the personal information and the information related to the installation,
- In the information related to the installation, fill in the inverter model and a serial number,
- Add the serial numbers of the other installed inverters by clicking on
- Save the account.
4.2 Using the interface
Go to the monitoring.imeon-energy.com website and log in with your login and password.
You will then be able to visualize the performance of your installation.
Parallel_assembly_installation_guide_v3.3
o Mode of operation
o Compliance
o Injection authorization
o Max power
o Date / time
o Technology
o Discharge only at night
o Same settings on charging controller (if used)
o Max current of charge by the network
o Min SOC without presence of the grid
o Min SOC in presence of the grid
o Activate AC backup
FR
EN FR
IT FR
ES
15