JBL Spot Guide De L'utilisateur page 5

troubleshooting your jbl spot
JBL Spot Specifi cations
Frequency Range:
40Hz – 20kHz
Power Consumption:
30W maximum
Power Input:
18V/2.5A
Satellite Transducer:
(1) 1 (25mm) Full-range
per channel
Amplifi er Output Power:
6W RMS per channel
Subwoofer Transducer:
6 (152mm) Atlas
Amplifi er Output Power:
24W RMS
Satellites Dimensions:
Diameter – 3-1/4 (83mm)
Height 2 (51mm)
Subwoofer Dimensions:
Diameter – 8 (203mm)
Height – 5-1/2 (140mm)
System Weight:
4.3 lb (1.95kg)
If you have any questions or need further assistance, please visit www.jbl.com.
These specifi cations are subject to change without notice.
Document Number: 950-0158-001
All manuals and user guides at all-guides.com
Symptom
Troubleshooting
No sound from the JBL Spot
speaker system.
™
Possible Problem
No power to the system.
Power adapter plug not inserted
correctly.
No volume or low volume.
Input source is low.
5 5
Solution
Ensure that the power supply is
connected to a live power source
and properly connected to JBL
Spot. Note: When JBL Spot is
powered, a green power LED on
the JBL Spot subwoofer should
light up.
Touch the volume "Up" (+) pad
on the volume control to un-
mute and/or increase the system
volume level.
Note: Touching the volume
"Down" (–) pad lowers the
system volume. Touching both
the (+) and (–) volume control
pads at the same time will mute
the system.
Increase the volume level on the
audio source device.
Description: JBL Spot Manual