Publicité
Les langues disponibles
Les langues disponibles
Press"▲" or "▼" to select "
Press "▲" or "▼" to select "SELECT ADDRESS", press " ◄" or " ►" to select address value.
Press "▲" or "▼" to select clear or not, and press " ◄" or " ►" to select YES or NO, and press
"
" to confirm.
Setting address :
Press "▲" or "▼" under "SERVICE MENU" page to select "SETTING ADDRESS" (Can also
enter by combining buttons pressing "
SERVICE MENU
STATE QUERY
CLEAR HISTORY ERROR
SETTING ADDRESS
HEAT CONTROL
OK
Press "▲" or "▼" to select item and press " ◄" or " ►" to set value. Then press "
and "
" to back.
◆Heat control
HEAT1 means pipe electric heating in cooling/heating mode. HEAT2 means tank electric heating
in DHW mode.
Press "▲" or "▼" to select "HEAT CONTROL" under "SERVICE MENU" page. Press "
enter submenu.
" and press "
CLEAR RUN TIME
CLEAR RUN TIME
SELECT ADDRESS
CLEAR COMP TIME?
CLEAR FIX PUMP TIME?
CLEAR INV PUMP TIME?
OK
1/3
" to confirm. Display as follows:
07
NO
NO
NO
", " ►" for 3s). Press "
SETTING ADDRESS
CONTROLLER
ADDRESS
CONTROL ENABEL
MODBUS ENABLE
MODBUS ADDRESS
OK
21
" and enter submenu.
10
#
NO
NO
10
#
" to confirm
" and
V.1
Publicité
