Telefunken HCTB5 Mode D'emploi page 20

 ENSURE TO CHECK THAT THE VOLTAGE MARKED ON THE RATING
PLATE MATCHES TO YOUR LOCAL SUPPLY. IF NOT THE CASE, DO
NOT USE THE APPLIANCE AND SEEK FOR EXPERT ADVICE.
 TAKE ALL NECESSARY MEASURE WITH CORDS AND EXTENSIONS
TO AVOID ANY INJURIES WHILE IN USE.
 FOR YOUR OWN SAFETY, WE RECOMMEND YOU NEVER LEAVE
THE APPLIANCE IN A PLACE THAT IS EXPOSED TO HUMIDITY OR
INCLEMENT WEATHER CONDITION.
 NEVER LEAVE APPLIANCE PLUGGED IN WHEN NOT IN USE.
 IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY THE
MANUFACTURER, ITS SERVICE AGENT OR SIMILARLY QUALIFIED
TECHNICIANS IN ORDER TO AVOID A HAZARD. THE SUPPLY CORD
SHOULD BE REGULARLY EXAMINED FOR SIGNS OF DAMAGE AND
THE APPLIANCE IS NOT TO BE USED IF THE CORD IS DAMAGED.
 THE APPLIANCE IS NOT INTENDED TO BE OPERATED BY MEANS
OF AN EXTERNAL TIMER OR SEPARATE REMOTE-CONTROL
SYSTEM.
 NEVER PLUG THE APPLIANCE WITH WET HANDS.
 NEVER USE THE APPLIANCE WITH BARE OR WET FEET.
 NEVER UNPLUG THE APPLIANCE BY PULLING THE POWER CABLE
OR THE APPLIANCE ITSELF.
 NEVER USE THE ELECTRIC WIRE TO LIFT UP, CARRY OR UNPLUG
THE APPLIANCE.
CONFORMITY
THIS APPLIANCE IS CONFORMED TO CURRENT DIRECTIVES AND
STANDARDS.
All manuals and user guides at all-guides.com
ENGLISH