Télécharger Imprimer la page

LENCO EPB-410 Mode D'emploi page 7

Masquer les pouces Voir aussi pour EPB-410:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Connect with Phone: Ope pho e setti g --- Bluetooth --- li k EPB-
3.
earphone is connected, indicator will turned into a blue light flashing with and you will
hear "connected".
4.
Music play/pause: Press the earphone button once to pause or play the music.
5.
Next track: Press the earphone button twice to go to the next track.
6.
Answer Call: Press the earphone button once to answer the phone call.
7.
Hang up Call: Press the earphone button once to end the conservation.
8.
Phone number redial: Press the earphone button once to pause music play, then quick
press the button two times to redial the last called/received phone number.
9.
Reject phone call: Press about two seconds to reject phone call.
10. Cancel Calling: Short press the earphone button when in the dialing state.
11.
Low Battery Alarm: If the earphone has less than 20% of the battery life, the light will
flash red for 5 seconds and you will hear a "low charge" sound.
12. Empty battery: When the battery of the earphone is empty, the earphone
automatically shuts down, the red light flashing and you hear "turn off".
13.
Automatic Connection:
The earphone automatically connects to the phone.
14.
Power Off: Put into the case, it will power off.
Factory settings: Press the headset button for 8 seconds to reset the setting to the
factory setting. When (re)pairing the earbuds after factory reset, you have to quickpress
2x the right earbud button to get them connected together . Then you can connect to a
Bluetooth device.
Listen music through 1 earphone single sin
1.
Power on:
The earphones automatically turn on when you remove them from the case
or press the earphone button around 1.5 second, red and blue light alternate flashing
and you will hear the sound "Power on".
2.
Pairing: press the earphone button 1.5 seconds, red and blue light alternate flashing
and you can connect your Bluetooth device.
3.
Music play/pause:
Press the earphone button once to pause or play the music.
4.
Next track: Press the earphone button twice to go to the next track.
5.
Answer Call:
Press the earphone button once if you want to answer an incoming call.
6.
Hang up Call:
Press the earphone button once to end the conversation.
7.
Phone number redial:
press the button two times to redial the last called/received phone number.
8.
Reject Calling:
Press about two seconds to reject phone call.
9.
Cancel Calling: Short press the earphone button when in the dialing state.
All manuals and user guides at all-guides.com
After the earphone and the connected phone are connected.
Press the earphone button once to pause music play, then quick
, Afte the

Publicité

loading