Aigostar 8433325501068 Mode D'emploi page 7

 Before using the unit for the first time, Unpack the unit.
 Before using the unit, make sure that the operating voltage of the unit
corresponds to the voltage of the electric network.
 Insert the plug into the socket.
 Press ON/OFF button for 1-2 seconds. The LED will illuminate, and the
heating plate will readily heat up and be ready for use within seconds.
 Separate a section of hair and smooth it out with the comb.
 Place the chosen section of hair between the heating plate and the comb.
Take care not to touch the very hot plates.
 Hold the appliance in place until the hair is fully heated this will be almost
instant. When holding the straightener always ensure fingertips are placed
away from the hot plates.
 Once the hair is heated, holding the hair taut, carefully slide the plates
along the selected section of hair, in one smooth movement all the way
down the ends.
 Keep the strands of hair smooth whilst you work, to avoid ridges half way
down.
 As with the heating plate that reach salon high temperatures, do not use
frequently to avoid damaging your hair.
 After use, press ON/OFF button for 1-2 seconds, the LED will go off,
indicating that the appliance is cooling down.
All manuals and user guides at all-guides.com
5