Publicité
Les langues disponibles
Les langues disponibles
Section
05
Built-in CD Player
Playing a CD
1
1 Track number indicator
Shows the track currently playing.
2 Play time indicator
Shows the elapsed playing time of the cur
rent track.
1
Insert a CD into the CD loading slot.
Playback will automatically start.
# Be sure to turn up the label side of a disc.
# After a CD has been inserted, press SOURCE
to select the built in CD player.
# You can eject a CD by pressing EJECT.
2
Use VOLUME to adjust the sound level.
3
To perform fast forward or reverse,
press and hold c or d.
4
To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur
rent track. Pressing again will skip to the pre
vious track.
Notes
! The built in CD player plays one, standard, 12
cm or 8 cm (single) CD at a time. Do not use
an adapter when playing 8 cm CDs.
! Do not insert anything other than a CD into
the CD loading slot.
! If an error message such as ERROR-11 is dis
played, refer to Understanding built-in CD
player error messages on page 14.
10
En
All manuals and user guides at all-guides.com
2
Playing tracks in a random
order
Random play lets you play back tracks on the
CD in a random order.
% Press 4 repeatedly to turn random play
on or off.
When random play is on, RDM appears in the
display.
Repeating play
Repeat play lets you hear the same track over
again.
% Press 5 repeatedly to turn repeat play
on or off.
When repeat play is on, RPT appears in the
display.
# If you perform track search or fast forward/re
verse, repeat play is automatically cancelled.
Pausing CD playback
Pause lets you temporarily stop playback of
the CD.
% Press 6 repeatedly to turn pause on or
off.
When pause is on, PAUSE appears in the dis
play.
Publicité
