Publicité
Les langues disponibles
Les langues disponibles
5.
Follow the instructions to complete the pairing. If prompted, enter a passkey, or refer to
the documentation that came with the device.
If the pairing is successful, your Sero 8 pro connects to the device.
Connecting Bluetooth Devices
Once you've paired with a Bluetooth device, then you can connect to it manually if you want
to switch devices or reconnect after it is back in range.
1.
Go to
Settings > WIRELESS &
2.
In the list of Paired Devices, tap a paired but unconnected device. When the Sero 8 pro
and the device are connected, the device is displayed as connected in the list.
Send Files
1.
Make sure Bluetooth is turned on.
2.
Press & hold the file you want send, tap
3.
Tap the device you want to send it to. The Sero 8 pro begins to send the file.
Tip:
You can see the sending status in Notification Tray.
Receive Files
1.
Make sure Bluetooth is turned on and visible. To set Visibility timeout, go to
WIRELESS & NETWORKS > Bluetooth > Menu icon > Visibility
2.
When the Bluetooth share icon
Tray and tap the notification, follow the instructions to complete the receiving.
3.
To check the information of Bluetooth received, go to
> Bluetooth > Menu icon > Show received
Tip:
You can see the receiving status in Notification Tray.
Rename or Unpair a Bluetooth Device
You can change the name of the Bluetooth device as it appears on your Sero 8 pro. You can
also unpair a Bluetooth device.
1.
Go to
Settings > WIRELESS &
2.
In the Bluetooth settings, tap the Settings icon
you want to configure.
3.
A screen opens that allows you to change the device's name or unpair it.
All manuals and user guides at all-guides.com
NETWORKS, make sure Bluetooth is turned on.
share icon
is shows up in Notification bar, open the Notification
files.
NETWORKS, make sure Bluetooth is turned on.
> Bluetooth icon
timeout.
Settings > WIRELESS & NETWORKS
beside the connected Bluetooth device
Making Connections
.
Settings >
16
Publicité
