Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Step 4:
INSTALL STRIKER PLATE
CENTER
LINE
A
C
Close door to mark horizontal center line of strike.
•
Measure one half of door thickness from door stop to mark
•
vertical center line of strike. Drill 1"(25.4mm) hole, 1/2"
(12.7mm) deep at intersection of horizontal and vertical
center lines.
Chisel out door jamb 3/32" (2.4mm) deep or until strike
•
plate sits flush with door jamb. Tighten screws securely.
1"(25.4mm)
HOLE
1/2"(12.7mm)
DEEP
B
DOOR
STOP
7
Publicité
