Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Step 1:
MARK DOOR
B
38" (965 mm) from floor
recommended height
Fold the template at the dotted line and tape the template
•
onto the interior side of the door.
Mark hole for the location for the lever and latch.
•
Step 2:
DRILLING HOLES
Option 1:
5/16"(8mm)
HOLE FOR
SCREW POST
Drill a 2-1/18" (54 mm) holes through door face as marked.
•
Drill a 1" (25 mm) hole as marked for the latch.
•
OPTION 1: Drill two (2) 5/16" (8mm) holes for screw post.
NOTE: DRILL THE 2-1/8" (54mm) HOLE FROM BOTH
SIDES TO AVOID SPLITTING WOOD.
C
A
2-1/8"(54mm)
HOLE FOR
LOCKSET
1" OR 31/32"
(24.6mm OR
25.4mm) HOLE
FOR LATCH
5
Publicité
