Koba Vision Vocatex Standard 3 Mode D'emploi page 34

Button 3 (press shortly to navigate between the different possibilities)
•
Brightness/background, Reading bar, Ticker (default)
•
Lighting, Reading line, Reading bar with ticker
Button 4: Different colour combinations
•
Black/White, White/Black, Black/Yellow, Yellow/Black, Black/Green, Green/Black (default)
•
Black/Red, Red/Black,
Magenta/Black, Black/Orange, Orange/Black, Black/Gray, Gray/Black, Blue/Yellow, Yellow/Blue,
Blue/White, White/Blue, Red/White, White/Red, Orange/White, White/Orange, Green/White,
White/Green
Button 6:
•
Overview/magnification (default)
•
Switch between magnifier and computer, Reset, Reading aloud
LIGHTING
(not set by default – ask your dealer to activate)
Press button 3 until the Vocatex announces "lighting".
By turning button 3 you can set the brightness of the camera and button lights.
READING LINE
(not set by default – ask your dealer to activate)
The horizontal reading line is a line from left to right on the screen.
Press button 3 until the line is displayed on the screen. Turn button 3 to set the position. Press and turn
button 3 to change the colour.
READING BAR WITH TICKER
(not set by default – ask your dealer to activate)
Same as reading bar in combination with the ticker.
HEADPHONE
A headphone or external speakers can be connected at the Vocatex (see mini-jack connector on
the back).
SLIDING TABLE
Under the table you can find a lever which controls the brake. If
you move the lever to the left, the slide table is free to move
left/right/up/down. If you move the lever to the right you adjust
the friction. If you move the lever all the way to the right, the slide
table will be blocked.
KOBA Vision Vocatex
Black/Blue, Blure/Black, Black/Cyan, Cyan/Black, Black/Magenta,
33