Main Functions - hi-Fun hi-Edo Manuel D'instructions

Main functions

1) Switch on hi-Edo.
To switch on hi-Edo hold the button (1) until warning LED (2) turns on. Afterwards hi-Edo automatically connects itself to the last
paired device, if available, and the warning LED (2) flash slowly in blue to confirm the connection. If there is no available paired
device or if it is out of range of hi-Edo, it turns off in about 2 minutes in order to avoid battery discharging.
2) Pair hi-Edo with a compatible device.
To pair for the first time, pair for a second time or to pair to a different device, hi-Edo must be set in pairing mode, signaled by
the warning LED (2) which flashes alternately and quickly in red and blue. To activate the pairing mode you need to switch off
hi-Edo and switch it on holding the starting button (1) until the warning LED (2) will flash alternately red and blue.
All manuals and user guides at all-guides.com