BELLAGIO H3OCTKTB2BSN Instructions page 2

TABLE OF CONTENTS
Important Instructions ........................... 2
Parts of the Heater................................ 3
Operating Instructions........................... 4
Specifications......................................
Cleaning and Maintenance..................... 5
Storage.............................................. 5
Troubleshooting...................................
Warranty............................................. 7
IMPORTANT INSTRUCTIONS
PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS HEATER
NOTE: There may be a trace of smoke or odour when unit is first operated. Do not be alarmed.
This indicates that a drop of oil fell on the heating coil during the manufacturing process. It
will quickly evaporate and should not re-occur.
Make sure that the room in which the appliance is located is well ventilated during this
operation.
WHEN USING ELECTRICAL APPLIANCES, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO
REDUCE RISK OF FIRE, ELECTRICAL SHOCK AND INJURY TO PERSONS OR PROPERTY, INCLUDING
THE FOLLOWING
1. Read all instructions before using this heater.
2. Check that neither the appliance nor the power cable has been damaged in any way during transportation.
3. Make sure that no pieces of polystyrene or other packaging material have been left between elements of
the appliance. It may be necessary to pass over the appliance with a vacuum cleaner.
4. Be sure that the plug is fully inserted into appropriate receptacle. Please remember that receptacles also
deteriorate due to aging and continuous use: check periodically for signs of overheating or deformations
evidenced by the plug. Do not use the receptacle and CALL your electrician.
5. Connect to properly polarized outlets only.
6. We do not recommend use of an extension cord as it may overheat and cause a risk of fire. However, if you
have to use an extension cord, the cord should be No. 14 AWG minimum size and rated not less than 1875
watts, and has to be used only for supplying power to this heater.
7. Ensure the heater is on a stable, secure surface to eliminate the potential of tipping it over.
8. Extreme caution and supervision is necessary when any heater is used near children or pets. Do not
operate the heater if unattended.
9. Always unplug heater when not in use.
10. Do not run cord under carpeting. Do not cover cord with throw rugs, runners or the like. Place cord away
from traffic area where it will not be tripped over.
11. It is normal for the heater's plug and cord to feel warm to the touch. A plug or cord which becomes hot to
the touch or becomes distorted in shape may be a result of a worn electrical outlet. Worn outlets or
receptacles should be replaced prior to further use of the heater. Plugging heater into a worn
outlet/receptacle may result in overheating of the power cord or fire.
12. To prevent possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces,
like a bed, where openings may become blocked.
13. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause electric
shock, fire or damage to the heater.
14. To prevent overload and blown fuses, be sure that no other appliance is plugged into the same outlet
(receptacle) or into another outlet (receptacle) wired into the same circuit.
15. A heater has hot or arcing or sparking pads inside. Do not use it in areas where gasoline, paint or
flammable liquids are used or stored.
H3OCTKTB2BSN
Bellagio By Airworks
5
6
2