Publicité
Les langues disponibles
Les langues disponibles
5. Press"CLEAN"button "
machine will run cleaning procedure for at least 20 minutes. Then the icon goes out. Press
this "CLEAN" button again, the machine will stop cleaning.
6. After cleaning procedure, move the appliance to the edge of the desktop, make sure that
the appliance is placed steady, place a water container under the appliance, remove drain
plug from the back, unscrew the tie on the pipe, pull out the plug from the drainpipe, water
in the tank under the drawer and the evaporator will drain into the water container, then
reinsert the plug and put it back again.
Change water in the water reservoir every 24 hours to ensure a reasonable hygiene level. If
the unit isn't to be used, drain all water & dry the water reservoir.
How to obtain the ice cube
7.
Before starting the ice making process, please check the drain pipe and drain pipe plug on
the back of the machine. Be sure to plug the drain pipe with a drain pipe plug and hang it
on the back of the machine.
Press the "ICE" button "
8.
work, press this button again, it will stop making ice. During ice making procedure, you can
see how much ice has been stored in the drawer through the observation window.
While the ice-maker is on, verify water level periodically. If water pump can't pump out
9.
water, the ice maker will stop automatically, and the "Add water" indicator will be on. Need
to pour water into the water reservoir inside.
We suggest you should press "ICE" button to turn o the unit first, then fill water up, again
press "ICE" button to restart the unit. Allow the refrigerant liquid inside the compressor at
least 3 minutes to settle before restarting.
USING YOUR ICE MAKER
", the icon lights up. After 5 seconds, this icon flashes, and the
", the icon lights up, 5 seconds later, this icon flashes, it begins to
7
Publicité
