Publicité
Les langues disponibles
Les langues disponibles
Bridging channels.
Two channels can generate a capacity of around 100W to a loudspeaker of
8 ohm. The switch (2) must be adjusted to the 'bridge' setting to do this.
The loudspeaker is then connected to the 2 red clamps on the loudspeaker
connection. The odd-numbered line input of the channels in question is then
used for the signal input. For example, if channels 1 and 2 are used in the
'bridge' setting, signal input 1 is used. Only the jumpers for the odd-
numbered inputs are used.
Overview of connections:
1:
Loudspeaker connection.
2:
Bridge switch.
3:
Volume setting.
4:
Routing setting (jumpers).
5:
Common line inputs.
6:
Individual line input.
7:
Line outputs (looped through to other amplifier).
8:
AC connection.
See Fig. 1
5. Examples of installations:
A single source for all zones:
single source can be heard in all 6 zones. Each zone has its own volume
control. All jumpers are positioned on L /R. The common input is used as
input (L/R).
See Fig. 2
n.v Jobetrade s.a
www.artsound.be
All manuals and user guides at all-guides.com
P 11
info@artsound.be
/
22
Connection to a multiroom system.
Up to 6 stereo channel zones can be additionally amplified. In the example
above, 4 extra zones have been amplified. The jumpers for the channels
used are positioned on 'IN'.
See Fig. 3
6. Warranty
There is a warranty of 2 years on the device from the date of purchase. The
warranty is valid for normal use of the device only. The warranty is no
longer valid in the event of improper use or after repairs have been carried
out by a non-qualified person. Any parts and hours worked during repairs
also fall under the terms of the warranty. Transportation costs are not
.
included in the warranty
n.v Jobetrade s.a
p 11
www.artsound.be
P 12
info@artsound.be
/
22
Publicité
