drybar The Baby Brush Crush Mode D'emploi page 6

• Slowly brush small sections at a time from roots to
tips. Hold the ends of each section as you brush for
better control.
• Repeat until desired smoothness is achieved.
• Optional: For added shape or bend, brush from be-
neath the section and angle the appliance in the de-
sired direction.
This iron has no user-serviceable parts. Servicing
should only be performed by an authorized service
representative. While not in use, ensure the iron has
completely cooled before being stored in a safe, dry
location.
For the safe usage of the iron, do the following every day:
• Check the cord and never use it if any parts are split,
torn, or damaged.
• Check the plug and never use if it is cracked, split or
damaged.
• Check the plug pins and never use if transformed or
damaged.
• Check the control panel and do not use if cracked,
split, broken or damaged.
• When not in use for long periods of time, clean and
dry the entire iron using the steps listed below and
store in a cool, dry place. When ready to use, follow the
maintenance steps above, confirming each function
of the iron.
HOW TO CLEAN YOUR BRUSH CRUSH TOOL
While your Brush Crush is completely cool, remove
any hair from the teeth using your fingers. Once all
hair is removed, turn the temperature up to the maxi-
MAINTENANCE