Bercomac 108926 Manuel D'installation page 9

WINCH CONTROL MODULE INSTALLATION
STEP 1: Disconnect the quick connect terminal wires from the winch relay, the limit switch cable and the toggle
switch cable.
Black wire
STEP 2: Connect the ring terminal black wire from the
module to the ground (black) post on the winch's relay
Black wire from module
FI_108926
PRODUCT # 108926
Red wire
Green wire
Black post on
winch's relay
Instruction Sheet
STEP 3: Connect the black wire from the module to
black wire from the relay and the green wire from the
module to the green wire from the relay.
Black wire from module
Black wire
Green wire
Green wire
from module
Green wire
R-11232017