Publicité
Les langues disponibles
Les langues disponibles
EN
Dear Customer,
We are delighted that you have chosen these magnifying glasses
with LED lighting. If you have any questions, contact the cus-
tomer service department via our website:
www.dspro.de/kundenservice
Explanation of the Symbols and Signal Words
Danger symbol. Read the associated safety notices
and follow them.
Circuit symbol for DC voltage
WARNING warns of possible serious injuries and danger to life
CAUTION warns of slight to moderate injuries
NOTICE
warns of material damage
Intended Use
•
The product is suitable for use as a magnifying lens.
•
The product is NOT a substitute for a normal visual aid with a
prescription. Do not use the product on public roads.
•
The product is NOT a pair of safety goggles. It is not suitable for
use as eye protection against hazards.
•
The product is designed for personal use only and is not in-
tended for commercial applications.
•
Use the product only for the intended purpose and as described
in the instructions. Any other use is deemed to be improper.
SAFETY NOTICES
■
WARNING – Danger of Suffocation! Keep children and ani-
mals away from the packaging material.
■
WARNING – Danger of Burns from Battery Acid! Batteries
can be fatal if swallowed. Do not leave small children unsu-
pervised with the product. They could take out the batteries. If
a battery is swallowed, immediate medical attention must be
sought.
■
CAUTION – Danger of Burns from Battery Acid! If a battery
leaks, avoid physical contact with the battery acid and wear
protective gloves if necessary. If you touch battery acid, rinse
the affected areas with abundant fresh water straight away and
seek medical assistance immediately.
■
The product is not a toy! Keep children and animals away from
the product to prevent injuries.
■
If any complaints arise during use, take off the product
immediately.
NOTICE – Risk of Damage to Material and Property
■
Use only the battery type specifi ed in the technical data.
■
Always replace all batteries together. Do not use batteries of
different types or brands, or batteries with different capacities.
■
Remove the batteries when they are dead or if you will not be
using the product for a prolonged period. This will prevent any
damage caused by leaks.
■
Remove a battery which has leaked immediately and clean the
contacts.
■
The batteries must not be charged or reactivated in any way,
disassembled, thrown into a fi re, immersed in liquids or short-
circuited.
■
Protect the product from: impacts, water or other liquids, mois-
ture, heat, direct sunlight and frost.
■
Do not use the product if it has visible signs of damage.
■
Do not make any changes to the product and do not attempt
to repair it. Contact the customer service department if there is
any damage.
■
The individual LEDs cannot be replaced.
■
Do not use any cleaning agents or rough sponges for cleaning.
These may damage the surfaces. If necessary, wipe down the
product with a conventional lens cleaning cloth or a damp, soft
cloth.
All manuals and user guides at all-guides.com
Article number: 07999
Items Supplied
1 x magnifying glasses incl. 4 x 3 V button cell (CR927)
1 x storage bag
1 x instructions
Check the items supplied for any transport damage. If the product
is damaged, do not use it but contact our customer service depart-
ment immediately.
Use
•
•
•
•
•
•
Replacing the Batteries
The battery compartments are located on each arm of the glasses.
1. Slide the battery compartment cover out of the arm of the glass-
2. There are two button cell batteries inside the battery compart-
3. Slide two new button cell batteries (3 V, CR927) into the holders
4. Slide the battery compartment cover back into the arm of the
Technical Data
Article number:
Model number:
Voltage of each LED: 6 V DC (2 x 3 V button cell, CR927 type)
ID of instructions:
Disposal
Customer Service / Importer
DS Produkte GmbH
Am Heisterbusch 1, 19258 Gallin, Germany
Tel.: +49 38851 314650*
* Calls to German landlines are subject to your provider's charges.
All rights reserved.
To switch on an LED, slide the switch on the arm of the glasses
towards the lenses. To switch it off, slide the switch back again.
The product can be worn on its own or over prescription glass-
es or contact lenses.
The product should be worn on the tip of the nose, do NOT
wear it in the same position as normal glasses to protect
the eyes.
If the product is worn over prescription glasses, leave a space
between the product and the glasses.
Hold the object which is to be magnifi ed approx. 30 – 40 cm
away from the product. Vary the distance until the object is in
focus.
If the performance of an LED diminishes, the batteries need to
be replaced.
es.
ment. Carefully slide them out of their holders using a screw-
driver, for example.
for each battery compartment. The positive pole must be facing
upwards.
glasses.
07999
20479-2
Z 07999 M DS V1 0619
Dispose of the packaging material in an environmentally
friendly manner so that it can be recycled.
Batteries should be removed prior to disposal of the product
and disposed of separately from the product at suitable col-
lection points.
The product is governed by the European Directive 2012/19/
EU on waste electrical and electronic equipment (WEEE).
Do not dispose of it as normal domestic waste, but rather
in an environmentally friendly manner via an offi cially ap-
proved waste disposal company.
Instructions
Publicité
