Worx ZIPSNIP WX080 Traduction Des Instructions Initiales page 11

PLUG REPLACEMENT
(UK & IRELAND ONLy)
If you need to replace the fitted plug then follow the
instructions below.
IMPOrTaNT
The wires in the mains lead are colored in accordance
with the following code:
BLuE=NEuTraL BrOwN=LIVE
As the colors of the wires in the mains lead of this
appliance may not correspond with the colored
markings identifying the terminals in your plug,
proceed as follows. The wire which is colored blue
must be connected to the terminal which is marked
with N. The wire which is colored brown must be
connected to the terminal which is marked with L.
warNINg!Never connect live or neutral wires
to the earth terminal of the plug. Only fit an
approved 13ABS1363/A plug and the correct rated
fuse.
NOTE: If a moulded plug is fitted and has to be
removed take great care in disposing of the plug
and severed cable, it must be destroyed to prevent
engaging into a socket.
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
Cordless mini cutter
All manuals and user guides at all-guides.com
13 Amp fuse approved
to BS1362
Brown L (live)
Cable grip
EC DECLARATION OF
CONFORMITy
We,
POSITEC Germany GmbH
Theodor-Heuss-Ring 1-3
50668 Köln
Declare that the product,
Description
wOrX Cordless mini cutter
Type wX080
Function Cutting
Complies with the following Directives,
EC Machinery Directive 2006/42/EC
EC Electromagnetic Compatibility Directive
2004/108/EC
Standards conform to
EN 60745-1
EN 55014-1
EN 55014-2
The person authorized to compile the technical file,
Name: russell Nicholson
address: Positec Powertools (Europe) LTD, PO Box
152, Leeds, LS10 9DS, uK
2011/08/11
Jacky Zhou
POSITEC Quality Manager
11 11
EN