Honeywell CS074AE Mode D'emploi page 7

USE & OPERATION (CONTINUED)
LOW WATER ALARM*
The unit is equipped with a Low Water Alarm sensor. In Cooling Mode, when water in the tank is below
the minimum level, you will hear a beeping sound and the indicator light will flash continuously.
The unit will automatically pause evaporative cooling.
Refill the water tank to deactivate the alarm in cooling mode. First switch OFF the unit and
unplug from the power outlet. Fill the water tank with water above the minimum water level mark.
Plug in and switch ON again.
To deactivate the alarm and continue using the unit as a fan (without evaporative cooling), switch
the unit OFF and then ON again. The Low Water Alarm will not activate in Fan only mode. The Low
Water Alarm will sound again if the COOL function is activated while the water tank is still empty.
CLEANING & DRAINING THE WATER TANK
Below are instructions on how to clean and maintain your air cooler. If the cooler will not be used
for a long period of time, please refer to the STORAGE & MAINTENANCE GUIDELINES located in the
separate Safety & Maintenance Guide.
WARNING:
Before cleaning the unit, switch the unit OFF and disconnect from the electrical socket.
• Move the unit to a location where the water can be drained. Pull out the Water Tank from the
front of the unit.
• Refill the water tank with clean water, up to the maximum level and drain it completely.
• Use a damp cloth to remove the dirt and dust from the surface of the unit. Never use corrosive
elements or chemicals to clean this product.
• When the product is not in use, store the unit in a dry place out of direct sunlight.
*Applicable for models with Low Water Alarm feature only.
EN 6