Power Dynamics PDX125 Manuel D'instructions page 4

Use of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
Cd Player Function
1. Power switch-Turn the machine on and off. (Turn it on before amplifier)
2. JOG WHEELS
The jog wheels allow you to fast-forward or rewind within a track and to change the playback speed. Turn the
jog wheel clockwise to fast-forward within the track. Turn the jog wheel anti-clockwise to rewind within the
track. The faster you turn the jog wheel, the faster the track will skip forwards/backwards. In Playback mode
rotate the jog wheel clockwise to increase the speed. Rotate the jog wheel anti-clockwise to decrease the
speed. The jog wheel allows you to create scratch effects as well.
3. REVERSE
Push the reverse button to play your track in reverse, it's indicator lights, push the reverse button again to
cancel this feature.
4. BRAKE
In play mode, push the brake button at first, starts the track at a speed that is slower than normal play back.
When you stop the track, the track slows down before playback is stopped completely.
5. TIME BUTTON
Use this knob to choose the time mode: elapsed time, remaining time or total remaining time. (With MP3 files
the total remaining time of the CD is not displayed. Depends on the model)
6. LOOP IN BUTTON
This button stets the beginning of the loop, the loop indicator flashes.
7. LOOP OUT BUTTON
When you press this button, you set the end point of the seamless loop and you start the loop. To finish the
loop, press again this button.
8. RELOOP BUTTON
This button is used to start the last saved loop. To finish the loop, press the re-loop button again.
9. SKIP <<BUTTON
In Folder-mode it is the last folder; in Track-mode the last track. Press the keystroke more than 1 second, it
will start up double-quick backwards function.
10. SKIP >>BUTTON
In Folder-mode it is the next folder; in Track-mode the lnext track. Press the keystroke more than 1 second, it
will start up double-quick forewards function.
11. FOLDER /TRACK
When the lamp lights when you press the button the unit is in Folder state, then press the – or + button, you
can choose any folder; otherwise the unit is in Track state, press the – or + button you can choose any track.
When the lamp glints you can turn the jog and choose any song.
12. CUE BUTTON
Pressing the CUE button during play provides a return to the position at which play was started and will
pause the track. Holding down CUE will start playback from this point and releasing CUE will cause it to
return to that point. So if the track is paused you can use the JOGWHEEL to locate a new cue point.
13. PLAY/PAUSE BUTTON
EACH TIME YOU PRESS THE PLAY/PAUSE BUTTON, THE OPERATION CHANGES FROM PLAY TO
PAUSE OR FROM PAUSE TO PLAY
14. AND 16. PITCH BEND –/+ BUTTON
The pitch will drop while the - button is pressed and return to the original pitch when it released. The pitch will
automatically rise when the + button is pressed and return to the original pitch when it is released.
15. PITCH BUTTON
IF YOU PUSH THIS BUTTON, THE ADJUSTEMENT OF THE PITCH POTENTIOMETER IS AVAILABLE
17. DISPLAY LCD INDICATES THE MOST IMPORTANT SETTINGS AND DATA.
18. CD Drawer- BUTTON Place your CD in holder (27). Use commercially CDs or burning CDs at the minimum
speed possible
19. VINYL BUTTON
When the LED indicator LED lights, dial the jog wheel for SCRATCH function.
IMPORTANT