AE Voxtel D220BT Démarrage Rapide page 9

6 INSTALLING YOUR PHONE
6.1 Connecting the base station (see P5)
Plug the power supply and line cord into the base station.
Plug the power adapter into a 210 - 240Vac, 50Hz mains socket and
the line cord into your telephone line socket.
Always use the cables provided in the box
Warning:
Use only the provided adaptor, using other power supplies may cause
a hazard.
Warning:
Install the base unit in a position where the mains adapter plug will
reach an easily accessible mains socket. Never try to lengthen the
mains power cable.
Note:
The base unit needs mains power for normal operation, not just for
charging the handset batteries.
6.2 Installing and charging the batteries (see P3)
Place the 2 supplied batteries into the battery compartment with the
polarity markings as shown. Use only the NiMH rechargeable battery
type provided.
Position the battery compartment cover over the batteries and slide
up to click into place.
Put the handset on the base and charge for 15 hours before using
the handset for the first time. The handset will give a beep when it is
properly placed on the base or charger.
7 USING YOUR PHONE
7.1 Introducing Bluetooth
Your new telephone system with Bluetooth wireless technology has
the following features:
All manuals and user guides at all-guides.com
9