Publicité
Installing the USB Device Driver
Have you already installed the supplied software?
Before connecting a Unit to a PC with a USB cable make sure to install the
supplied software first.
If the Base Unit is not an RTR-500GSM, please follow directions for installing
the USB Device Drivers found in the Introductory Manual that came with the
Base Unit you are using.
1.
Open the "RTR-
500GSM for Windows"
from the Start Screen
or Start Menu.
2.
Open the RTR-500GSM
Settings Utility.
3. Connect the Unit with the supplied USB cable to your computer.
The USB driver installation will start automatically.
* Do not connect a Unit to your computer until the software has been
installed.
* It is not necessary to connect the AC adaptor at this point.
For Windows XP:
The [Found New Hardware Wizard] window will appear. Please see "USB Driver for
Windows XP" for details (see page 28).
4. After the USB driver installation is completed, the factory default
settings will be displayed automatically in the settings window.
Launcher Window
Installation du logiciel et du pilote USB de l'appareil
27
Publicité
