Télécharger Imprimer la page

AEG Voxtel C110 Guide De Démarrage Rapide page 8

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25
8 8
When you have entered the full number (maximum 32 digits), lift the handser or press the
speakerphone button
To end the call, return the handset to the base unit or press the speakerphone button
speakerphone was selected.
8.2
To answer a call
When the phone rings;
Lift the handset or press the speakerphone button
>The call timer starts after going on line and the speakerphone light will turn on if speakerphone
is selected.
8.3
To adjust the speakerphone volume
During a call;
Adjust the volume of the speakerphone to your comfortable volume level using the speakerphone
volume slide control
8.4
To end a call
Replace the handset on the base unit cradle or press the speakerphone button
>The speakerphone light indicator will turn off.
8.5
To switch between the handset and the speakerphone
During a phone conversation through the handset, press the speakerphone button
free.
The conversation remains through the handset until the handset is replaced on the base unit cradle.
Then the speakerphone light will turn on. While in speakerphone mode, lift the handset to switch off
the speakerphone and talk if through the handset.
8.6
Last number redial
Lift the handset or press the speakerphone button
Press the redial button
>The phone automatically dials the last number you called (maximum of 32 digits).
Automatic redial
If the number you have called is busy, you can redial it automatically by simply pressing the dial button 
, which will release the current call, wait a few seconds and then redial the last number.
8.7
Outgoing call list
The Voxtel C110 automatically stores the number (up to 16 digits) and duration of the last 10 calls
made.
8.8
Viewing the outgoing call list
In standby mode, press the out button
>The display shows the most recent dialled call and its position in the outgoing calls list.
>If there are no outgoing records, the display will show "End".
Press the out button
>Press the out button
8.9
To redial a call
When the outgoing record is displayed. Lift the handset or press the speakerphone
button on the base unit.
>The phone automatically dials out the displayed record.
All manuals and user guides at all-guides.com
or dail button
on the base,and the number will dial out automatically.
located on the right side of the base unit.
.
.
again to show the duration of that call.
repeatedly to step through each call record in turn.
on the base unit.
on the base unit.
if
on the base unit.
to speak hands-
or dail

Publicité

loading