Plantronics Vista M12 Guide D'utilisation page 19

VISTA.multiling.guide
1. Adjust the volume by turning the
2. Try different volume settings. 1 is the
3. "Make a Test Call" (see page 19)
1. Outgoing Volume is pre-set. Try making a
2. To access the Outgoing Volume Control,
3. Use the screwdriver attached to the bottom
4. Replace the panel door and the screwdriver.
24
All manuals and user guides at all-guides.com
11/4/98 5:55 PM Page 24
L E A R N T H E B A S I C S
Adjusting Headset Incoming Volume
Thumbwheel on the top panel.
quietest and 9 is the loudest.
provides more details about adjusting
your incoming volume.
Adjust ing Headset Outgoing Volume
test call before adjusting (see page 19).
remove the panel on the left-hand side of
the amplifier. The same panel houses the
Telephone/Amplifier Compatibility Switch.
of the amplifier to adjust the Outgoing
Volume Control. Turn clockwise to make
your voice louder to the caller. Turn
counter-clockwise to make your voice qui-
eter to the caller.
e n g l i s h
L E A R N T H E B A S I C S
Muting a Call
1. Activate the Mute function by depressing the
Mute switch (colored indicator showing).
2. Deactivate the Mute function by releas-
ing the Mute switch (no colored
indicator showing).
Making and Receiving Calls with a
Handset
1. Release the Headset /Handset switch
(no colored indicator showing).
2. Use the phone handset as you normally
would.
e n g l i s h e n g l i s h 25