Publicité
Les langues disponibles
Les langues disponibles
1. The start light or
display does not light
when power is on
2. The blower doesn't
work after pressing the
start bottom.
If after stabilization, it
doesn't work, there must
be wrong
No power in stove or in the
control panel.
Fuse is broken
It is normal.
It will start automatically
when the temperature is
above 30 degrees on the
venting pipe.
No power in stove or in the
control panel.
Or Unplugged on the mother
board
The low temperature sensor is
broken
75
Check the power and wires.
Replace the fuse
Please wait
Check the power and wires.
Plug it
Replace it
Publicité
