Mute & Reset Buttons - CGS Merlin GDP2 Guide D'installation Et D'utilisation

Installation & Operation Manual
Mute & Reset Buttons
Mute
The mute button is located on the front fascia of the GDP2 and is used to mute the sounder inside the
board when in alarm. The internal buzzer operates at approximately 90db measured 30cm from a closed
panel. The mute button is used to mute the sounder inside the board when in alarm.
Reset
The reset button is located on the front fascia of the GDP2 and is used to turn the system on and to reset
the system following alarm.
ISSUE: 02 01-22 EN
Merlin GDP2
10