Risk Of Electric Shock; Risk Of Explosion And Fire - Perel AC028 Mode D'emploi

 Only use this device for charging batteries mentioned in this
manual. Do not use the device for charging non-rechargeable or
lithium-ion batteries.
 Place the battery in a well-ventilated location during charging.
 Do not operate with a damaged cable, power cord or mains plug.
Damaged power cords are hazardous to life due to the risk of
electric shock.
 Before connecting to the mains, make sure that the mains current
is standard 220-240 V~, 50 Hz, equipped with an earthed neutral
conductor, a 16 A fuse and a residual-current circuit breaker.
 Disconnect the device from the mains before connecting the
battery.
 Disconnect the device from the mains after charging and only then
remove the terminal clamp from the chassis.
 Protect yourself from highly explosive oxyhydrogen gas reaction.
 Make sure that there are no sources of open fire (flames, embers
or sparks) in the vicinity when charging or discharging batteries.
 Make sure that the positive terminal connecting cable has no
contact with a fuel line.
 Make sure that no explosive and flammable substances, e.g.
petrol or solvents, can be ignited during charging.
 Ensure that there is adequate ventilation during charging.
V. 01 – 21/08/2017
AC028
WARNING

RISK OF ELECTRIC SHOCK!

WARNING

RISK OF EXPLOSION AND FIRE!

WARNING
RISK OF CHEMICAL BURNS
4 ©Velleman nv