Télécharger Imprimer la page

IXON clim8 Guide D'utilisation page 6

Publicité

Les langues disponibles

Les langues disponibles

in these cases, we invite you to
disconnect the batteries.
HEAT SETTINGS AND
DURATION
Each glove has its own clim8®
heating system and may heat up
differently.
You can manually adjust the heat
on your phone directly within the
clim8® app. The higher the target
temperature is, the shorter the
battery is going to last. The heating
duration per charge depends on
the selected/calibrated tempera-
ture, your profile, your activity,
ambient temperature and weather
conditions as well as charging
status of the batteries.
STORAGE AND CARE
When storing the IT-SERIES
gloves, allow it to cool down
before folding. Avoid creasing
the IT-SERIES gloves or placing
items on top of it during storage.
For regular use, you can store
your IT-SERIES gloves without
disconnecting the battery. The
system will go to Stand by mode
and consume minimal battery life.
For long-term storage, disconnect
the battery from the IT-SERIES
gloves. To prolong battery life,
we recommend charging at least
every 6 months. This ensures that
the maximum battery power is
10
preserved for many years!
Please keep the IT-SERIES gloves
in a dry and aired place, and so as
they are not exposed to shocks or
the weight of other objects.
DRYING AND CLEANING
Note: Please make sure to remove
the battery before cleaning
the IT-SERIES gloves. Batteries
.
should never be immersed
Do not
Do not
Do not
Do not
Do not
wash
bleach
tumble
iron
dry
dry
clean
Dirty gloves should be cleaned
delicately using a damp cloth or,
where necessary, with a clothes
brush. For persistent stains, you can
use a neutral soap. For the leather
gloves in particular, apply a special
waterproofing wax regularly. Dry
away from heat source and direct
sun.
Make sure the IT-SERIES gloves
and the connector are dry before
connecting a battery.
TROUBLESHOOTING
LED BLINKING
Orange LED, slow blinking: the
IT-SERIES gloves is running out
of battery. Please refer to battery
charging instructions.
Purple LED, rapid blinking:
the firmware of the IT-SERIES
gloves is being updated. DO NOT
disconnect the battery!
Red LED, rapid blinking: please
try to disconnect and reconnect
the battery. If the problem persists,
please remove the battery and
contact IXON.
HEATING SYSTEM
E.g.: The product is not heating, the
batteries do not seem to work, etc.
Quick solution: Run the diagnostic
through the clim8® app by going
to settings at the top right of the
screen. Click on Diagnostic and
follow the instructions.
If the problem persists, please
follow the clim8® app procedure.
CLIM8® APP
E.g.: The clim8® app does not start,
problem appairing the product, etc.
Quick solutions:
Kill the clim8® app
Reboot your phone
Uninstall and reinstall the
clim8® app
If the problem persists, please
contact clim8.
CONTACT
If you encounter any issue with the
clim8® app or the heating system,
please contact clim8:
In the clim8® app, directly in the
product page or in your profile
By opening a ticket on our
dedicated support website
https://support.myclim8.com/
By sending an email to
support@myclim8.com
We will answer as soon as possible.
If you encounter any other issue
with the IT-SERIES gloves, please
contact your nearest dealer.
EN
FR
11

Publicité

loading