CEBEK Controle Vox PM-11 Manuel De L'utilisateur

Sound activated relay. As long as the circuit receives signal at the audio input, the output will be connected.
It incorporates a potentiometer for sensitivity adjustment, an indicator led, and protection against polarity inversion.
Especially suitable for automation applications in processes where it is required to detect an audio signal.
POWER SUPPLY: Connect the 12 VDC power supply to the POWER terminal respecting the ± polarity.
Install a switch for protection and safety, as reflected in the CE standard.
Before activating the switch, make the rest of the circuit connections.
To supply 230 VAC use our FE-103 or FE-300 power supplies.
FUNCTIONING . Connect the input signal to the terminals. The length of the cable should be as short as possible.
You must use shielded low frequency cable. The input signal can be provided by auxiliary jacks, mixing consoles,
etc., it cannot exceed 300mV maximum level.
The circuit every time it receives an audio signal will connect the output through the relay, remaining connected until
it stops receiving signal. If you want to regulate the sensitivity of the circuit, adjust it using the potentiometer.
Relais activé par le son. Tant que le circuit reçoit un signal à l'entrée audio, la sortie sera connectée.
Il intègre un potentiomètre pour le réglage de la sensibilité, un voyant LED et une protection contre l'inversion de
polarité.
Particulièrement adapté aux applications d'automatisation dans les processus où il est nécessaire de détecter un
signal audio.
www.cebek.com - sat@fadisel.com
Vox control
Contrôle Vox
Vox control
Vox control
PM-11
Technical characteristics
Voltage : 12 V. D.C
Minimum Input Signal : 10 mV.
Maximum Input Signal : 300 mV.
Consumption : 2 to 60 mA..
Frequencies margin :
Output type : Relay - NO / NC
Max. Output load : 7A ( 2A for inductive loads)
Operating Indicator Led : Yes.
Protection Inversion Polarity : Yes.
Sizes : 72 x 42 x 20 mm.
Weight : 30,3 gr.
Din rail : C-7562
30 - 12.000 Hz.