NX CEP9003 Mode D'emploi page 2

UK
OPERATING INSTRUCTIONS
States Of Indicating LED:
1. GREEN: Power on, Float charge
2. RED: Fast charge
Proper Charging Procedures:
1. Input voltage: 100-240VAC, 50/60Hz ·
2. Make sure charger's output voltage matches battery's input
voltage.
3. Plug in charger before connecting output leads to the battery.
GREEN LED indicates power is ON.
4. After hooking battery up to charger, RED LED will light up
indicating FAST CHARGE.
5. GREEN LED will come on charger has switched to FLOAT
CHARGE indicating that battery is close to be fully charged.
When using the charger, basic precautions should
Read all the instruction before using the charger;
To reduce the risk of injury close supervision is necessary when
CHARGING RECOMMENDATIONS FOR CYCLIC APPLICATIONS
SEALED LEAD-ACID BATTERY CHARGER
IMPORTANT SAFETY INSTRUCTIONS:
--- WARNING ---
always be followed, including:
the charger is used near children.
CAUTIONS
1. Always use basic precaution such as paying close attention
to proper matching of charger and battery and correct
polarity connection, positive (RED) to positive, negative
(BLACK) to negative.
2. Read the instructions and charging information before using
any charger. ·Keep children away from charging set-up.
3. Indoor use only. Remove charger from AC outlet when
charging is completed.
4. Avoid shock and water.
CEP9003