Konica Minolta Bizhub 184 Manuel D'installation page 6

IX. Installing the Toner Bottle
Note:
A toner bottle may not be shipped with your
machine. If not, purchase one that is separately
available.
1. Shake the toner bottle well about five times in the
vertical direction. Then, turn it over and repeat
the same procedure.
Note:
The toner can cake in the toner bottle. Be sure to
perform this procedure.
2. Open the front door.
3. Insert the toner bottle halfway with the tape side
up, and then slowly peel the tape off the bottle.
Tape
4. Aligning the tip of the bottle tab with the
mark, insert the toner bottle all the way in.
5. Check that the toner bottle is all the way in, and
then turn the toner bottle in the direction of the
arrow to lock it.
6. Close the front door.
A0XXIXC018MA
A0XXIXC050MA
E-6