Télécharger Imprimer la page
RECARO Performance 84215627 Instructions D'installation
RECARO Performance 84215627 Instructions D'installation

RECARO Performance 84215627 Instructions D'installation

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

Congratulations on your purchase of the Camaro RECARO Seats
Seat Kit Includes
Qty
Description
1
Recaro Seat
1
Chevy Performance Badge
1
Instruction Sheet
Warning: This vehicle is equipped with a Supplemental Inflatable Restraint (SIR) System. Failure to follow the correct procedure
could cause the Air bag deployment, personal injury, and/or unnecessary SIR system repairs
1. Disable SIR system by disconnecting the neg. battery cable.
2. Disconnect the seat belt from the seat by removing Cover and Front Seat Belt Anchor Plate Bolt (Torx Head Bolt T-27).
3. Adjust the seat to the full forward position and remove the rear bolts (Torx Head Bolt T-50, see picture above, Qty 2).
4. Disconnect the front seat electrical connector.
5. With the aid of an assistant, remove the front seat by tilting it forward and lifting, then pull seat rearward to disengage the
front hooks.
6. Replace with new seat, reconnect connector, torque rear bolts to 45 Nm (33 lb ft), torque Seat Belt Anchor Plate/Bolt to 6 Nm
(53 lb in) and re-install cover, re-connect negative battery cable.
7. MEMORY SEAT ONLY: Reprogram Front Seat Memory Control Module (No call to TCSC or VCI required). Reprogramming
of the Memory seat control module will be done at the dealership at no cost to the customer.
Warranty Information: To maintain vehicle warranty both driver AND passenger RECARO seats must installed by an authorized
GM dealer. Seats must match the original vehicle configuration (i.e. RECARO Memory seats should be installed in Camaro with
Memory seat option). Further, these RECARO seats are ONLY to be installed on 2016+ Camaro Coupe and Convertible vehicles
and are NOT compatible other vehicle models.
Recaro Performance Driver Seat Installation
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
84215627
REV 09NO16
PART NO.
DATE
04OC16
Initial Release - Michael Fischer
09NO16
Revision - Michael Fischer
1
SHEET
REVISION
3
OF
AUTH
2553330
2553330

Publicité

loading

Sommaire des Matières pour RECARO Performance 84215627

  • Page 1 Warranty Information: To maintain vehicle warranty both driver AND passenger RECARO seats must installed by an authorized GM dealer. Seats must match the original vehicle configuration (i.e. RECARO Memory seats should be installed in Camaro with Memory seat option). Further, these RECARO seats are ONLY to be installed on 2016+ Camaro Coupe and Convertible vehicles and are NOT compatible other vehicle models.
  • Page 2 être posés par un concessionnaire GM agréé. Les sièges doivent correspondre à la configuration originale du véhicule (c.- à-d. des sièges à mémoire RECARO doivent être posé dans une Camaro équipée de l'option siège à mémoire). De plus, ces sièges RECARO doivent UNIQUEMENT être posés sur les véhicules Camaro coupé et décapotable 2016+ équipés de sièges en cuir de base dotés de l'option chauffants/ventilés.
  • Page 3 GM. Los asientos debe coincidir con la configuración original del vehículo (es decir, los asientos de Memoria RECARO deben ser instalados en un Camaro con la opción de asientos con memoria). Además, estos asientos RECARO SÓLO se deben instalar en vehículos Camaro Coupé y Convertibles 2016+ con Asientos de piel base que incluyan la opción de calefacción/ventilación y NO sean compatibles con asientos de tela...

Ce manuel est également adapté pour:

Performance 84215634