General Setup - Watts TRITON TRCU1 Guide De L'utilisateur & Manuel D'instructions

All manuals and user guides at all-guides.com
Important Safety Information
General Setup, Use, and Care Precautions
TO AVOID SERIOUS PERSONAL INJURY:
BEFORE using the equipment. Do not
use unless you know the safe and proper
operation of this equipment.
and BEFORE every use for damage and
signs of wear. Replace any worn, dam-
aged, or broken part BEFORE using.
is not working properly or if the unit will
not power on. Equipment that cannot be
controlled by the power (On/Off) switch is
dangerous and must be repaired before
using.
manufacturers. Only use TRITON Power
Cords and Fuser Cords with the system.
Substituting alternative equipment may
cause personal injury or damage to the
equipment, or void the product warranty.
that power (On/Off) switch is in the "Off"
position before plugging (connecting) the
equipment into an electrical outlet (recep-
tacle).
doing, and use common sense while
using or working near this equipment.
under the influence of drugs, alcohol, or
medications. Inattention, fatigue, and drug
and/or alcohol influence may result in seri-
ous personal injury.
when using the equipment. Dress properly
for the job. Use eye and hand protection
as appropriate to help minimize risk of
serious personal injury.
times, and do not overreach while using
the equipment.
ground or a stable work surface. Do not
use the Control Unit on a ladder or shelf.
other than making a weld as instructed
in this Manual. Using the Fuser as pliers,
a wrench, or a hammering device may
result in serious personal injury and can
damage the equipment.
move, or position the Control Unit for use.
the electrical outlet (receptacle) when not
in use, or while performing service, repair,
or cleaning.
by trained and qualified technician.
cleaning, servicing, or repair. NEVER
attempt to clean, service, or repair unless
the equipment is completely unplugged.
The person performing the cleaning, ser-
vice, or repair MUST keep the GFCI plug
under his exclusive control.
or Fuser case (housing). There are no
serviceable parts inside the Control Unit
or Fuser.
recommended repair and replacement
parts.
surfaces) clean and dry.
caustic, or harsh cleaning fluid or chemi-
cals. Use only water with mild soap. Dry
with soft, clean cloth.
for this equipment.
secure place, out of reach of children and
unauthorized personnel or workers.
9