Vertiv MINI-TOWER Serie Guide De L'utilisateur Pour L'installation Rapide

LIEBERT PSI5™ UPS
MINI TOWER MT SERIES
Quick Installation User Guide
IMPORTANT: Before installing,
connecting to supply or operating
your Liebert PSI5 UPS, please
TM
review the Safety and Regulatory
Statements sheet. For detailed
installation, operating, maintenance
and troubleshooting information
refer to the PSI5 User Guide
TM
available at www. V ertivCo.com.
INSTALLATION
Inspect the UPS for any signs of
obvious damage. If damage is
visible, do not proceed and call our
warranty support line for
assistance at 1-800-222-5877
menu option 3, or email at
microups.warranty@vertivco.com.
Install the PSI5 UPS in a
TM
temperature-controlled
environment that is free of
corrosive and conductive
contaminants. Avoid locations near
heat or water sources and exposed
to direct sunlight. For proper
ventilation, leave four inches
clearance on all sides of the UPS.
The input outlet should be nearby
and easily accessible.
NOTE: This UPS is not for use in a
computer room as defined in the
standard for the protection of
electronic computer/data processing
equipment of ANSI/NFPA 75.
PSI5 750 1100MT120 Rear Panel PSI5 750 1100MT120 Rear Panel
7
3
8
9
PSI5 1500MT120 Rear Panel
7
8
9
# Description
1 Ground screw
2 Network/Phone/DSL surge protection
3 USB port
4 Programmable receptacles
5 Non-programmable receptacles
6 SNMP IntelliSlot port
7 Emergency Power O (EPO) connector
8 Input circuit breaker
9 AC input
2 6
5
4
1
6 2 1
4
5
3
1
590-1992-665A