Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Model:
The ice-making cycle
seems normal but no
ice is produced.
Poor ice-making result
EFIC123-B-SSRED/EFIC108-B-RED/EFIC123-B-SS/EFIC123-B-SSBLACK
EFIC117-SSBLACK-B-CU/EFIC117-SS-B/EFIC117-SSRED-B-COM/EFIC117-
SSCOPPER-B-COM
EFIC189-SILVER/RIC102-B-SILVER/EFIC108-C-BLACK/EFIC108-C-WHITE/
EFIC108-C-SILVER
Applicable climate:
Class:
Power source:
Rated power:
Refrigerant/Refrigerant amount: R600a / 23g
Foaming agent:
Net weight:
Ice marking amount per time: 9pcs.
Ice-dispensing time: 8mins (depends on the ambient temperature and water temperature).
Daily ice output:
Housing:
Unit size（DXWXH)： 310*230*325mm
is of too low temperature.
The ambient temperature or
water temperature is too high.
Refrigerating system leaks
Refrigerating system blocks
1.Poor heat dissipation.
2.The water temperature is too
high.
3.The ambient temperature is too
high.
ST/SN/N/T
I
120V/60Hz
105W
C
H
5
10
7. 7 kg
12Kg/24H
PP
water ranges between 8℃
and 25℃.
Start the ice-making cycle at
a environment with an
ambient temperature less
than 32° C and fill the
water reservoir with some
cold water.
Call customer service
Call customer service
1. Leave a 6-inch clearance
on all sides of the ice maker
for proper ventilation.
2. Fill the water reservoir
with water ranges between
8℃ and 28℃.
3. Operate the ice maker at
a environment with an
ambient temperature
between 10℃ and 32℃.
10
Publicité
Table des Matières
