INDU+ IDP401Z Mode D'emploi Et D'installation page 71

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The control panel displays [ E ]:
• The electronic system is defective.
• Disconnect and reconnect the hob.
• Call after sales service.
One or all cooking zone(s) are cut off:
• The safety system functioned.
• This system works when you forgot to switch off the cooking zone.
• One or more sensitive touch keys are covered.
• The pan is empty and its bottom overheated.
• The hob also has an automatic reduction of the power level (see Booster function), and is
switched off automatically when there is a possibility of overheating.
The ventilation system is still working after switching off the hob:
• This is not a failure, the fan continues to protect the electronic device.
• The fan stops automatically.
The automatic cooking system does not start:
• The cooking zone is still hot [ H ].
• The highest Booster level is set [ 9 ].
The control panel displays [ U ]:
• See chapter "Keep warm".
The control panel displays [ II ]:
• See chapter "Stop&Go".
The control panel displays [
See chapter "Grill Function".
The control panel displays [
An object or liquid covers the control keys. The symbol disappears as soon as the key is
released or cleaned.
The control panel displays [ E2 ]:
The hob is overheated, let it cool and then turn it on again.
The control panel displays [ E8 ]:
• The air inlet of the ventilator is obstructed, release it.
The control panel displays [ U400 ]:
• The hob is not connected to the network. Check the connection and reconnect the hob.
The control panel displays [ Er47 ]:
• The hob is not connected to the network. Check the connection and reconnect the hob.
If one of the symbols above persists, call the SAV.
]:
] or [ Er03 ]:
71

Publicité

Table des Matières
loading

Produits Connexes pour INDU+ IDP401Z

Ce manuel est également adapté pour:

Idp402z1Idp40wok

Table des Matières