Timer - INDU+ IDP401Z Mode D'emploi Et D'installation

•
Power management:
The whole cooking hob is equipped with a maximum potential. When the Booster function is
activated, the electronic system automatically orders to reduce the power level of another heating
zone, in order to avoid exceeding the maximum potential. The display blinks [ 9 ] during a few
seconds, then shows the maximum of power allowed :
Heating zone selected
[ P ] is displayed

Timer

The timer can be used simultaneously with all the heating zones, and this with different time
settings (from 1 to 999 minutes) for each heating zone.
•
Setting and modification of the cooking time :
Action
Select the power level
Select the timer
Decrease the time
Increase the time
After a few seconds, the [ min ] display stops blinking.
The time is confirmed and the timer starts.
•
To stop the cooking time:
Action
Select the Timer
Stop the time
If several timers are activated, repeat the process.
•
Egg timer function:
Egg timer is an independent function. It stops as soon as a heating zone starts working in the
"Keep warm" Function (see below).
When the hob is switched off, the timer continues until it has reached the selected time.
Action
Activate the hob
Select the Timer
Decrease the time
Increase the time
After a few seconds, the [ min ] display stops blinking.
The time is confirmed and the timer starts.
•
Automatic stop at the end of the cooking time:
As soon as the selected cooking time has finished, the timer display is blinking [ 000 ] and a sound
rings.
To stop the sound and the blinking, press the key [ - ] and [ + ].
Other heating zone: (example: Booster level 9)
[ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone
Control panel
slide on the "SLIDER"
Press simultaneously key [ - ] and [ + ] Timer display on
of the timer until the
desired display is on
Press key [ - ] of the timer
Press key [ + ] of the timer
Control panel
Press simultaneously key [ - ] and [ + ] Timer display on
of the timer until the
desired display is on
Press key [ - ] of the timer
Control panel
press display [ 0/I ]
Press simultaneously key [ - ] and [ + ] [ 000 ]
of the timer
Press key [ - ] of the timer
Press key [ + ] of the timer
65
Display
[ 1 ] to [ P ]
[ 60 ] to 59, 58...
Time increase
Display
[ 000 ]
Display
[ 0 ]
[ 60 ] to 59, 58...
Time increase