Jfb 14 K With "Weld-On Cone" System - Jung Tandem K Série Mode D'emploi

4.4 JFB 14 K with "weld-on cone" system

The JFB 14 K with support surface,
JTLB 14 K with rotary plate or "weld-on
cone" system as well as the JTLB 6 K are
installed analogously.
3
No. Designation
1 Connecting rod with Joint
2 Trolley cassette
3 Screws M10
> Measure the required width for the trolley on the
load.
> Fold out connecting rod (1).
> Push through the connecting rod (1) in the mounts
of the trolley cassettes (2) and fix in place with
screws (3).
- 38 -
2
1
Quantity
1
2
2
Tandem trolleys, K and G series
3
For transporting containers, note the
dimension of 2260 mm.
© JUNG Hebe- und Transporttechnik GmbH
2