Opening Dimensions - Haier HCC2220BEB Instructions D'installation

OPENING DIMENSIONS

This cooktop has been designed to accommodate a wide range of cutout sizes to
allow possible replacement with other brands. For a new installation, we recommend
that you consider the minimum dimension of cutout size.
NOTE:
•
If installing a range hood or microwave hood combination above the
cooktop, follow the range hood or combination microwave hood installation
instructions for the required clearance above the cooktop surface.
•
When installing the cooktop over a base cabinet, use a base cabinet with
sidewalls wider than the cutout requirements to avoid needing to notch
down the base cabinet sidewalls to clear the cooktop base.
•
If the base cabinet has a drawer, a 5¹⁄₂" (14.0 cm) depth clearance from the
top of the countertop to the top of the drawer (or other obstruction) in the
base cabinet is required.
c
Description
(A) Width of the cooktop
(B) Combustible area above countertop
(C) Minimum clearance between top of cooktop and
bottom of uncovered wood or metal cabinet.
(D) Recommended overhead cabinet depth
(E) Minimum clearance between front edge of
countertop and front edge of cooktop
(F) Depth of cooktop opening
(G) Min. height from countertop to nearest cabinet on
either side of the cooktop
(H) Junction box: minimum from top of countertop
(I) Junction box: maximum from right side of cabinet
a
b
f
l
e
h
i
k
j
4
d
g
Dimension
24" (60.9 cm)
19¹⁄₄" (49.0 cm) 19¹⁄₂"
(49.7 cm)
a
30" (76.2 cm)
18" (45.7 cm) min
2" (5.1 cm)
19³⁄₈" (49.2 cm)
15" (38 cm)
7" (17.8 cm)
9" (23.0 cm)