Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Grounded Neutral
Junction Box (not provided)
A
Black Wires
B
Neutral (White) Wire
C
Ground (Green or Bare) Wire
D
Cable from Cooktop
E
2.
Attach the UL listed conduit connector (F) to the junction box (not provided).
3.
Thread the cable from the cooktop (E) through the conduit connector to access
the wires, and then tighten the conduit connector screw.
4.
Connect the 2 black wires (B) together using a UL listed wire connector.
5.
Connect the neutral (white) wire (C) from the house electrical supply to the
ground (green or bare) wire (D) from the cooktop cable using a UL listed wire
connector.
6.
Connect the 2 red wires (G) together using a UL listed wire connector (H).
7.
Gently tuck the wire connections into the junction box, and install the junction
box cover.
4-WIRE CONNECTION (UNGROUNDED NEUTRAL) - U.S.A. ONLY
4-Wire Cable from Home Power Supply
IMPORTANT:
Use the 4-wire cable from home power supply in the U.S. where
local codes do not allow grounding through neutral, new branch circuit
installations (1996 NEC), mobile homes and recreational vehicles, new
construction and in Canada.
1.
Disconnect power.
a
b
c
d
e
10
i
h
g
f
UL Listed Conduit Connector
F
Red Wires
G
UL Listed Wire Connector
H
House Electrical Supply
I
Publicité
Chapitres
Table des Matières
