Video Setting - LENCO TFT-1028 Mode D'emploi

Sort
Sort your channels from the following options:
[LCN] ‐ Sort the channels in ascending order.
[Name] ‐ Sort the channels in alphabetical order.
[Service ID] ‐ Sort the channels according to the station.
LCN (Logical channel number)
Set LCN on or off.
Video Setting
To access the Menu, press SETUP then select [Picture]. The Menu provides options to adjust the video settings.
Press UP/DOWN to select an option and press RIGHT/LEFT to adjust that setting. Press EXIT to exit the menu.
Aspect Ratio
You must set the display format to either 4:3 PanScan,4:3 Letter Box,4:3 Full, 16:9 Wide Screen, 16:9PillarBox or
Auto to get the maximum display when watching TV.
Resolution
If the video does not appear correctly, change the setting. This setting is to match the most common setting for
HDMI.
[576i] for PAL system TV.
[576P]: for PAL system TV.
[720P]: for NTSC or PAL system TV.
[1080I]: for NTSC or PAL system TV.
[1080P]: for NTSC or PAL system TV.
TV format
If the video does not appear correctly, you need to change the settings. This should match the most common
setting for TVs in your country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV.
10