Back View; Getting Started; Main Unit Installation; Display Modes - Oregon Scientific WR608 Manuel D'utilisation

BACK VIEW

1
2
3
4
5
6
1. Wall mount holes
2. EXT:external antenna jack
3. SP: external speaker jack
4. AC / DC adapter jack
5. Battery compartment
6. RESET: reset unit to default settings

GETTING STARTED

MAIN UNIT INSTALLATION

• Plug AC/DC adapter into socket. Make sure the adapter
is not obstructed and is easily accessible to the unit.
To completely disconnect from power, the adapter should be
disconnected from the main unit.
All manuals and user guides at all-guides.com
4
NOTE The main unit and adapter should not be exposed to
wet conditions. No objects filled with liquid, such as vases,
should be placed on the main unit and adapter.
Insert batteries:
1. Remove the battery compartment cover.
2. Insert the batteries, matching the polarities.
indicates battery is low.
NOTE Batteries should not be exposed to excessive heat
such as sunshine or fire.

DISPLAY MODES

There are 2 display modes:
1. Clock mode
2. Radio status mode

CLOCK DISPLAY

To switch between the clock mode displays, press MENU.
Current time Alarm 1