Use; Maintenance And Cleaning - Qilive Q.5328 Manuel D'utilisation

5. USE

EN
5.1 Charging
Notes:
• The appliance cannot be used while charging.
• Charge the appliance when the battery power indicator is blinking.
1. Hang the appliance on its wall mounting bracket. Plug the charger tip into the charging port on
the top of the handle.
2. Plug the charger into a wall socket.
3. During charging, the indicator light bars on the handle will illuminate in order of charge state
and will blink, indicating the battery is charging. All the lights will be OFF when fully charged.
1
5.2 Operating the vacuum cleaner
1. Insert the desired accessory into the tube suction
opening or directly to the main body.
2. Press the power button to turn the appliance on.
3. This appliance has low and high suction power.
To regulate the suction power, press the Low /
High suction button. The LED will be lit white at
High speed.
Note: After turning on the vacuum cleaner, the
default suction power is set to high.
4. After vacuuming is finished, press the power
button again to turn the appliance off.
5. Empty and clean the dust cup. Hang the
appliance on its wall mounting bracket.

6. MAINTENANCE AND CLEANING

Note: Always switch off, and disconnect the appliance from the power supply (if charging) before
changing accessories, cleaning or maintenance.
1. Do not submerge the appliance, its supply cord, and adapter in water or other liquids.
2. Avoid corrosive liquids and materials. Do not use any abrasive cleaners, chemicals, glass
cleaners, universal cleaners, disinfecting agents or oil-based maintenance agents! Those
products may damage the appliance.
6.1 Cleaning the main body and accessories
1. Use a soft damp cloth to wipe off any dirt from the main body. Pay attention to not allow water
to get inside the appliance. Let it dry completely before use.
2. Wipe the accessories with a soft damp cloth and, if necessary, a little mild detergent. Let them
dry completely.
6.2 Cleaning the duct container
1. Under the bin, unhook the latch, and the lid will swing open. Empty the contents.
2. Gently pull the filter and its protection from the duct container under the dustbin. Empty the
contents of the dust cup into a dustbin and clean it with a damp cloth, with a soft brush or rinse
with cold water if necessary. Ensure the dust cup is completely dry before replacing it.
2
10