F.Bertazzoni F60CONXD Feuille De Caractéristiques page 15

Programming the Cooking Stop Time
1 Press on the clock sensor
until the symbol
2 Select the cooking stop time by pressing
the or sensors.
3 Two consecutive beeps will then sound and
the display will show the remaining cooking
time. The symbol will flash slowly to
indicate that the oven will switch itself
automatically.
4 Select a cooking function and temperature.
5 Once it is the set time, the oven will turn
off, an alarm will sound and the
will flash more quickly.
6 Press on any sensor on the control panel to
stop the alarm.
You can change the programmed cooking stop
time at any moment by pressing on the clock
sensor until the
then by pressing on the
The two beeps you hear after that will confirm
the new time has been set.
You can use this function even if you are
already cooking with the oven. If this is the
case, follow all of the above instructions
except No. 4.
Programming Cooking Time and Cooking
Stop Time
11 Press on the clock sensor
will light up.
12 Select the cooking time by pressing the
or sensors.
13 Two consecutive beeps will then sound,
and the display will show the remaining
cooking time. The
slowly.
14 Press on the clock sensor
times until the symbol
15 Select the cooking stop time by pressing
the or sensors.
16 This will be confirmed by two beeps. The
current time will show on the display and
the ) symbol will remain lit.
several times
lights up.
symbol
symbol flashes and
or sensors.
). The symbol
) symbol will flash
several
lights up.
17 Select a cooking function and temperature.
18 The oven will remain off, with the
symbol lit and the
slowly. The clock will show the current time
and the inside light will remain off. The
oven is now programmed.
19 When it is time to start cooking, the oven
will switch on and will operate for the
programmed cooking time. The clock
display will show the remaining cooking
time.
10 Once the set time is reached, the oven will
turn off, an alarm will sound and the
and symbols will flash.
11 Press on any sensor on the control panel
to stop the alarm.
If you wish to change the cooking stop time
while cooking is in progress, press on the
clock sensor until the
You can then change the cooking stop time by
pressing on the
beeps you hear after that will confirm the new
time has been set.
Child Safety Function
This function locks the oven, preventing small
children from playing with it. To turn on the
function, press on the
hear a long beep and see several flashing
dots between the digits of the temperature
display. The oven is now locked.
To turn off the child lock, keep the
pressed until a long beep sounds.
Caution
In the event of power failure, your electronic
clock timer settings will be erased and 12:00
will flash on the clock display. Reset the clock
and programme again.
symbol flashing
symbol flashes.
or sensors. The two
symbol until you
symbol
15